
|
Feeder Filler Gas Model
Now
you can fill your feeder from the ground, with a hinged or spring
loaded lid you never have to climb a ladder again
Price: $ 339.00 + $45 shipping
|

|
The Feeder Filler
Electric model was designed for display purposes only but can be used
in the field if you have an electric supply close by. This unit can
still be used with a gas blower also. 3" ten foot section of pipe not
included.
Price: $ 339.00 +
$45
shipping
|

|
We do
sell the bucket only for those who have thier
own motor. The motor must have a 3" outlet and proper clearance from
the ground for adequate air flow. We do not guaranty a bucket only
purchase. 3" ten foot section of pipe not included.
Price: $ 239.00 + $30 shipping
|

|
The 350lb Auto Deluxe
feeder was designed to replace the standard 55gal feeder. You can
easily convert to protien in the spring with shorter legs and a 4 way
gravity feed attachment. Made from high density polyethelene this unit
will not rust. The hopper weight is only 30lbs. Comes with; 88" legs,
complete 12 volt control system. This unit ships common carrier. Please
email us for a shipping quote. A minimum charge of $75.00 is charged
for this unit for a business address and add an additional $27.50 for
residential
delivery.
Price: $419.00 + $122.50
shipping
|

|
The 1200lb capacity hopper
is 3/8 thick HDPE UV protected plastic that will not rot, rust or leak.
Our hopper has built in channels that the legs fit into. Adjustable
hardware components allow you to adjust the height for conversion from
automatic timer feeding in the fall, to gravity feeding protein through
the summer months. Our feeder is built to be rock solid, water proof,
and resist condensation. hopper weight is 60lbs, height adjustment is
108" to 132". Legs are 105" 1 1/2 14ga. galvanized steel. All
galvanized hardware. Lid is hinged. Unit comes with a 4-way free choice
splitter. You can save alot of gas with this feeder. This uint ships
common carrier. A minimum charge of $95.00 will be charged for delivery
to a business and an additional $27.50 for delivery to a residence.
Please e-mail us for a delivery quote.
Price:
$529.00
+ $142.50 shipping
|

|
The 1200lb capacity hopper
is 3/8" thick HDPE UV protected plastic that will not rot, rust or
leak. Our hopper has built in channels that the legs fit into.
Adjustable hardware components allow you to adjust the height for
conversion from automatic feeding in the fall, to free choice feeding
in the summer months. Our feeder is built to be rock solid, water
proof, and resist condensation. Hopper weight is 60lbs. Adjustable
height is 108" to 132"
Legs 105" 1 1/2" 14ga galvanized steel
Galvanized hardware.
Hinged lid. Spincast comes with;
Funnel spout and mounting plate.
Control system with solar panel and cable.
Varmit cage and mounting hardware.
The timer.
12v Battery.
You can save alot of gas with this feeder. Please email for a quote on
shipping. A minimum charge of $95.00 is charged for delivery to a
business. Add an additional $27.50 for delivery to a residence.
Price: $719.00 + $142.50 shipping
|

|
The deer feeder/blind foot
will anchor your feeder or blind to the ground using a "T" post. No
more worring about your feeder/blind falling over or sinking into the
mud. Set of 3.
Price: $35.95 + $21.00 shipping
|